Οδηγός εγκατάστασης

Αυτός ο οδηγός θα σας καθοδηγήσει στα βήματα για να εγκαταστήσετε το νέο σας φίλτρο για πρώτη φορά.
Αν ψάχνετε για έναν άλλο τεχνικό οδηγό, δείτε τους άλλους οδηγούς μας παρακάτω.


Χρήσιμες πληροφορίες

Καλώς ήρθατε στον οδηγό χρήσης του φίλτρου νερού iX.
Αυτό το εγχειρίδιο καλύπτει την εγκατάσταση, τη ρύθμιση, τη λειτουργία και τη συντήρηση του συστήματος φίλτρου νερού iX.
Η τήρηση αυτών των οδηγιών εξασφαλίζει τη βέλτιστη απόδοση του συστήματος, παρέχοντας καθαρό και διαυγές νερό.
Πριν προχωρήσετε, βεβαιωθείτε ότι διαθέτετε τα απαραίτητα εργαλεία και ανταλλακτικά φίλτρα.

Διαβάστε εγγύηση & αποποίηση ευθυνών

Βήματα εγκατάστασης

Αρχική ρύθμιση

Βήμα 1: Αποσυσκευασία και προετοιμασία

1.1 Αποσυσκευάστε το σύστημα iX και βεβαιωθείτε ότι υπάρχουν όλα τα εξαρτήματα.
1.2 Επιλέξτε μεταξύ επιτοίχιας ή επίπεδης επιφανειακής εγκατάστασης.

Βήμα 2: Επιλογή της θέσης εγκατάστασης

2.1 Επιλέξτε μια προσβάσιμη θέση με επαρκή χώρο κοντά στην πηγή νερού.

Βήμα 3: Διαμόρφωση επιτοίχιας τοποθέτησης (προαιρετικά)

3.1 Σημειώστε τις θέσεις των οπών διάτρησης στον τοίχο χρησιμοποιώντας τις οπές του βραχίονα.
Τρυπήστε τις οπές και τοποθετήστε τα αγκύρια τοίχου.
Ευθυγραμμίστε το στήριγμα και στερεώστε το στον τοίχο με βίδες.
3.2 Κρεμάστε το σύστημα iX στο στήριγμα.
Βεβαιωθείτε ότι η κεφαλή βρίσκεται στη θέση κλειδώματος.
3.3 Συνδέστε τις υδραυλικές εγκαταστάσεις, εξασφαλίζοντας ασφαλή και στεγανά εξαρτήματα.
3.4 Πραγματοποιήστε έναν τελικό έλεγχο για διαρροές και σωστή εγκατάσταση.

Βήμα 4: Τελικός έλεγχος

4.1. Ελέγξτε όλες τις συνδέσεις, τη σταθερότητα της τοποθέτησης και δοκιμάστε τη λειτουργικότητα της μονάδας.

Οδηγός εγκατάστασης προϊόντος

Βήμα 5: Ενεργοποίηση της βαλβίδας απελευθέρωσης/ξεπλύματος

5.1 Βεβαιωθείτε ότι η κεφαλή βρίσκεται στη θέση κλειδώματος.
5.2 Εντοπίστε τη βαλβίδα απελευθέρωσης/πλύσης στο επάνω μέρος της κεφαλής και ενεργοποιήστε την.
Ξεκινήστε τη ροή του νερού και σημειώστε τον ρυθμό.
Τοποθετήστε το σωλήνα έκπλυσης/θυρίδα εξόδου για τη συλλογή του νερού (π.χ. σε έναν κουβά ή νεροχύτη).
Ξεπλύνετε τις μονάδες καφέ και ατμού στη ρύθμιση παράκαμψης 1.
5.3 Πραγματοποιήστε μια αρχική έκπλυση με τουλάχιστον 25 λίτρα νερού για την απομάκρυνση των ακαθαρσιών.
5.4 Ελέγξτε τη διαύγεια του νερού.
Το καθαρό νερό χωρίς φυσαλίδες υποδεικνύει ότι το προϊόν είναι έτοιμο.

Βήμα 6: Ρύθμιση μεταβλητής παράκαμψης φίλτρου

6.1 Περιστρέψτε τον επιλογέα Variable Bypass για να προσαρμόσετε τις ρυθμίσεις παράκαμψης.
6.2 Επιλέξτε τις επιθυμητές ρυθμίσεις παράκαμψης (0-4) με βάση τις ανάγκες φιλτραρίσματος.
6.3 Επαληθεύστε τη σωστή ευθυγράμμιση πριν από την κανονική λειτουργία.

Βήμα 7: Τελικός έλεγχος

7.1 Βεβαιωθείτε ότι οι επιλεγμένες ρυθμίσεις παράκαμψης είναι στη θέση τους, ότι το νερό είναι καθαρό και ότι η μονάδα δεν έχει διαρροές.

Αλλαγή του εσωτερικού φίλτρου

Βήμα 8: Αντικατάσταση του φίλτρου

8.1 Κλείστε την παροχή νερού (προαιρετικά).
Περιστρέψτε την κεφαλή αριστερόστροφα μέχρι την κεντρική θέση με την ένδειξη “απελευθέρωση”.
8.2. Περιστρέψτε τον διακόπτη εκτόνωσης πίεσης στην κεφαλή για να εκτονώσετε την πίεση από το φυσίγγιο μέσω της εξόδου/σωλήνα έκπλυσης.
8.3 Περιστρέψτε την κεφαλή στην πλήρως ξεκλειδωμένη θέση.
Αφαιρέστε την κασέτα και ξεκλειδώστε το μάνταλο του περιβλήματος στο σώμα της κασέτας.
Περιστρέψτε το επάνω κολάρο για να ανοίξει και αφαιρέστε το ανταλλακτικό.
Απορρίψτε την περίσσεια νερού από το περίβλημα, εάν είναι απαραίτητο.
8.4 Αντικαταστήστε το ανταλλακτικό, επαναφέρετε το κολάρο, ασφαλίστε τη μονάδα χρησιμοποιώντας το μάνταλο του περιβλήματος και ασφαλίστε την.
Επανατοποθετήστε την κεφαλή εισάγοντας την στο περίβλημα στη θέση “ξεκλείδωμα” και περιστρέφοντάς την δεξιόστροφα στη θέση “κλείδωμα”.
Εάν η παροχή νερού είναι ενεργοποιημένη, η μονάδα θα αρχίσει να γεμίζει.
8.5. Ενεργοποιήστε τη βαλβίδα απελευθέρωσης/καθαρισμού για να εκτελέσετε ένα ξέπλυμα.

Βήμα 9: Ενεργοποίηση της βαλβίδας απελευθέρωσης/ξεπλύματος

9.1 Ελέγξτε τη ροή του νερού.
Εάν δεν τρέχει νερό, ανοίξτε τη γραμμή παροχής νερού και ξεπλύνετε τις μονάδες όπως προηγουμένως.
9.2 Πραγματοποιήστε μια αρχική έκπλυση με τουλάχιστον 25 λίτρα νερού για την απομάκρυνση των ακαθαρσιών.
Σημειώστε ότι οι μονάδες καφέ και ατμού πρέπει να ξεπλένονται στη ρύθμιση παράκαμψης 1.

Φιλική προς τον πλανήτη επιχείρηση

Για κάθε φίλτρο που ανακυκλώνουμε, φυτεύουμε ένα μαγγρόβιο δέντρο με το One Tree Planted – κάνοντας τη διαφορά, ένα φίλτρο τη φορά.

Τα μαγκρόβια είναι ζωτικής σημασίας για τα τροπικά οικοσυστήματα και χρησιμεύουν ως παράκτιες δεξαμενές άνθρακα της φύσης.



Μάθετε περισσότερα

Γίνετε μέλος της κοινότητάς μας

Κοινωνικά @ix.water

IX
IX-WATER---LA-MARZOCCO-9
ezgif.com-animated-gif-maker
Roger-1
Mangrove Water

Warranty & Disclaimer

Warranty Provisions

The iX Water filter system is subject to the statutory warranty of 2 years from the date of purchase. A warranty claim may only be asserted if all instructions in this manual are followed and observed.

Storage/Transport

Follow the specified ambient conditions outlined in the technical data for both storage and transportation.

Recycling/Disposal

The packaging material is recyclable and can be reused. Dispose of all materials in compliance with local regulations.

iX Water accepts used filter cartridges for recycling, please visit www.ix-water.co.uk for more details or contact your distributor. Alternatively, you may dispose of the cartridges in accordance with local regulations.

If you choose not to return the filter cartridges, please ensure the disposal of all materials aligns with local regulations.

Qualified Personnel

Only trained and authorized personnel should perform the installation and maintenance of the filter system.

Correct Use

Achieving perfect and safe operation of the product is contingent upon following the installation, use, and maintenance instructions outlined in this manual. Use only filter cartridges specifically designed for your filter system.

Liability Exclusion

Installation and cartridge exchanges must be performed precisely in accordance with the instructions in this manual. iX Water shall not be held liable for any damage, including subsequent damage, arising from the incorrect installation or use of the product.

Specific Safety Information

• Water used as intake water for the iX Water filter system must be of drinking water quality. The water filter system is only suitable for cold water use within the water intake temperature range stated in the technical data.

• If there are official instructions to boil tap water, the filter system must be decommissioned. When the requirement to boil water comes to an end, the filter cartridge must be replaced and the connections cleaned.

• It is generally recommended to boil tap water for certain groups of people (e.g. people with weakened immune systems, babies). This also applies to filtered water.

• Note for people with kidney disease or dialysis patients: During the filter process, potassium levels may increase slightly. If you suffer from kidney disease and/or have to stick to a special potassium diet, we recommend you consult your doctor beforehand.

• It is recommended not to decommission the filter system for long periods. If the iX Water filter system is not used for several days, it is recommended that the filter system be flushed with the volume of water indicated in the table below.

Filter cartridge

Flushing volume after 2–3 days of stagnation

Flushing volume after 4 weeks stagnation

Small

3 litres

30 litres

Medium

6 litres

60 litres

Large

10 litres

100 litres

All new system and refill installations require 25 litres to be flushed before connection to an working application.

The filter housing must not be opened or dismantled during operation.

Technical Safety Assembly Instructions

• The appliance in which the filter is used must be free of limescale and gypsum deposits prior to installation.

• Protect the filter system from sunlight and mechanical damage. Do not assemble near sources of heat and open flames.

• A stop valve and non return valve must be installed before the filter system inlet hose.

• A Pressure-reducing valve is recommended if the Working Pressure is greater than 3.5 bar.

• WORKING PRESSURE 1.5 – 6 BAR

· WATER INLET TEMPERATURE 4 – 30 °C*

· ONLY CONNECT TO A COLD FOOD-SAFE WATER SUPPLY

• When choosing the material for parts that come into contact with water after the iX Water filter system, it is important to remember that, due to the process, decarbonized water contains free carbon dioxide. For this reason, only materials that are compatible with free carbon dioxide must be use. Hoses of drinking water quality must be used .

• All parts must be installed in accordance with the country-specific guidelines on the installation of drinking water facilities.

Repair

Regularly check the filter system for leaks. Regularly check the hoses for kinks. Bent hoses must be replaced.

Troubleshooting

No water flow Cause: Water intake closed. Troubleshooting: Open the water intake at the upstream stop valve

No or low water flow despite open water intake Cause: Mains pressure too low. Troubleshooting: Check mains pressure. If the fault persists, examine the filter system and filter refill and replace if necessary. Cause: Filter head not mounted in the direction of flow. Troubleshooting: Dismantle the filter head and install it in the direction of flow.

Leak Cause: Screwed connections not fitted correctly. Troubleshooting: Inspect mains pressure. Check all screwed connections. If the fault persists, consider replacing the filter system.

Need to speak to an engineer now?

If you are struggling with an urgent issue such as a heavy leak or totally out-of-action machine, you can contact us using the details below. If you need to contact us out of hours, we recommend using WhatsApp

Monday - Friday | 8:30 - 17:00

Not an emergency?

For enquiries, machine sales and other non-urgent issues please use the details below:

Phone: 07714 172329
Email: technical@17grams.co.uk
Address: 6 Gloucester Street, Brighton, BN1 4EW